The LSWT uses in-house 3D printers extensively for wind tunnel models. Parts are often selected for 3D printing if they are intricate in design, frequently expected to change, or need to be manufactured quickly or cheaply.
The LSWT also offers 3D printing services to anyone with or without use of other LSWT services. Three printers are available: Stratasys FDM, Formlabs Form 3, and Formlabs Form 3L.
One of the best reasons to print with the LSWT is our experienced staff. As part of the print cost, the LSWT staff will briefly review the component for issues that may hamper print, handling, or final use quality of the part and suggest minor design changes as required. Full design reviews are also offered for an additional fee.
Contact the LSWT for a print estimate. An STL file type is required.
Cost | Layer Thickness | Material | Build Area | |
Stratasys | $35/hour | 254 microns (0.010 inch) 178 microns (0.007 in) upon request | ASA (Natural) Other Stratasys materials available upon request | 40.7×35.6×35.6 cm (16x14x14 in) |
Formlabs Form 3 | $20/hour and $0.50/mL | 25 – 300 microns (.001 – .012 in) | Rigid 10k and Grey Pro available immediately, all other Formlabs materials upon request | 33.5×20×30 cm (13.2×7.9×11.8 in) |
Formlabs Form 3L | $20/hour and $0.50/mL | 25 – 300 microns (.001 – .012 in) | Rigid 10k and Grey Pro available immediately, all other Formlabs materials upon request | 14.5×14.5×18.5 cm (5.7×5.7×7.3 in) |